High Temp Red RTV Silicone
Part No: 65309
Product Details:
High-Temp Red Silicone is a high temperature, high adhesion, moisture curing gasketing material that cures into a strong silicone rubber that maintains long term durability and flexibility. Excellent for filling, sealing, bonding or weatherproofing. Resists aging and weathering. Will not harden, shrink or cracks.
高温红色硅胶是一种高温、高附着力、湿气固化垫片材料，可固化成坚固的硅橡胶，保持长期耐用性和柔韧性。 非常适用于填充、密封、粘合或防风雨。 抗老化和风化。 不会变硬、收缩或开裂。
Size: 3 oz. Units per case: 12
Features 特征
- High Temperature Applications 高温应用
-
Temperature Resistance up to 耐温高达 650°F(343°C)
- Oxygen Sensor Safe 氧气传感器安全
- Low Volatile 低挥发性
Use To Replace Silicone Gasket Material, Paper, Cork, Felt and Rubber Gaskets
用于替代硅胶垫片材料、纸、软木、毛毡和橡胶垫片
-
For best results, surfaces should be clean and dry. 为获得最佳效果，表面应清洁干燥。
-
Cut nozzle and apply a continuous 1/16″ to 1/4″ (2 to 6mm) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. 切割喷嘴并将连续的 1/16 英寸至 1/4 英寸（2 至 6 毫米）硅胶珠涂抹在一个表面上，围绕所有螺栓孔。立即在硅胶未干时组装部件。 用手拧紧，直到材料开始从法兰周围挤出。
- Let dry for one hour then tighten to torque specifications. 让其干燥一小时，然后拧紧至扭矩规格。
- Allow 24 hours to fully cure before filling with fluids or returning to service. 在加注液体或重新投入使用之前，等待 24 小时使其完全固化。
-
Replace cap after use. NOTE: Not recommended for use on head gaskets or parts in contact with gasoline. 使用后盖上盖子。 注意：不推荐用于缸盖垫圈或与汽油接触的部件。
Contains: Amorphous silica
Precautionary Statements – Storage
Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Precautionary Statements – Disposal
Dispose of contents/container to an approved waste disposal plant.
Keep out of the reach of children.
防范说明 - 储存
存放在通风良好的地方。 保持容器密闭。 商店上锁。
防范说明 - 处置
将内容物/容器处理到经批准的废物处理厂。
放在儿童接触不到的地方。